CleanMate 365
CleanMate 365
CleanMate 365
CleanMate 365
Cleaning Dust Bin and Air Filter
1.Make sure the power to the unit is 'Off'.
2.Press the Dust Bin Open Button. Illustration 1
3.Remove the Dust Bin Cover. Illustration 2
4.Remove the Dust Bin from its compartment by placing your finger(s) in the
groove near the front of QQ-2L, and on the tab at the center of the air filter.
Squeeze to disengage the tab, and then lift the Dust Bin straight out of its
compartment. Illustration 3
5.Remove the Air Filter from the Dust Bin by firmly holding the Dust Bin in one
hand, and pulling the Air Filter straight out by the tabs on the Air Filter.
Illustration 4
6.Empty the contents of the Dust Bin into a trash can. Illustration 5
You may rinse out the Dust Bin with water if you need to. Illustration 6
Allow the Dust Bin to completely dry before using it again.
7.Using the Hand Brush that is provided with the unit, brush off the dirt and debris
on Air Filter
into a trash can. Illustration 7
The Air Filter can be rinsed with water.
Make sure the Air Filter is completely dry before using it again.
8.DO NOT clean the Dust Bin or the Air Filter in a Cloth Washing Machine or a
Dish Washing Machine.
9.While the Dust Bin is removed from its compartment, turn the unit over, and
using the Hand Brush provided with the unit, brush away any excess dust that
might have accumulated in the compartment into a trash can.
10.Once the Dust Bin and Air filter are completely dry, put the Air Filter back in
place on the Dust Bin. Illustration 8. Then put the assembled Dust Bin and Air
Filter back into the Dust Bin compartment, with the air filter pointed away from
the control panel.
11.Put the Dust Bin Cover back in place by first inserting the tabs on the cover into
the slots on the case of the unit, then press down firmly on the ridges of the Dust
Bin Cover until the Release Button clicks into place. Illustration 10. Make sure
the Dust Bin Cover is securely in place before operating the unit.
Tab
Tab
Illustration 1
Illustration 2
Illustration 3
Illustration 4
Illustration 5
Illustration 6
Illustration 7
Illustration 8
Illustration 9
Illustration 10
Cleaning the CleanMate 365
Over time dust and dirt can accumulate in different areas of the unit, DO NOT
use Water to clean the unit itself! This is an electrical unit, and if any of the
electric components get wet, the unit will no longer work, and could cause a
short circuit and potentially hurt someone. Use Canned Air, the Hand Brush
provided with the unit, or a dry cloth to wipe away accumulated dust and dirt.
After operating the machine for a period of time, dust and dirt will accumulate
on the vacuum entry on the bottom of the QQ-2L. Cleaning this area regularly
will help ensure that the unit performs properly.
1.Make sure the power of the QQ-2L is turned off.
2.Turn the unit upside-down, and brush any dust that has accumulated inside
the vacuum entry as shown below. Shake the dust out into a trash can.
Cleaning and Maintenance
Cleaning and Maintenance
Cleaning and Maintenance
Cleaning and Maintenance
14
15
