8
4. In a submenu, move the cursor (>) to RETURN and press the ,
buttons
to return to the previous menu. In every menu, move the cursor (>) to EXIT
and press the
button to exit the menu.
Note:
1.
If “…” appears right behind an option, it means there is a submenu under
this option. If “---” shows behind an option, it refers to the value cannot be
set in current mode.
2.
Once the intervals of the operation to OSD menu reach 2 minutes, the OSD
menu will disappear.
Keyboard RS485 Control Setting:
First of all, be sure that +/- terminals of RS485 connectors in camera and
keyboard connect correct; make sure both the protocol and baud rate of camera
and keyboard are identical. Then, press “95, SHOT” to access menu.
Deflecting the joystick upward, downward, leftward and rightward moves the
cursor up, down, left, and right. Besides, twisting the head of the joystick
rightward accesses to submenu; twisting the head of joystick leftward returns
to previous menu, twisting the head of joystick upward or downward to change
the set value.
7.1 CAMERA SET
This mainly configures the parameters setup regarding synchronization mode,
camera title, camera ID, protocol, baud rate, etc.