Infinity Total Solutions TSS-800 Скачать руководство пользователя

Страница: 3 / 26

TSS-800 (230V)

Left and Right Front Channels

For left and right front channels, place one satellite to the left and
another to the right of the television, as shown in Figure 1.
Since the speakers are magnetically shielded, you can place them
very close to the TV without worrying about the magnetic field
distorting the picture.

Center Channel

For the center channel, place the speaker directly on top of, or
below, your television. Use a shelf or one of the included wall
brackets if the television does not provide a stable platform.

Surround Channels

For left and right surround channels, place one speaker on the left
and another on the right, to the side of or slightly behind the
listening area. The surround speakers should be mounted at a height
of between 5 ft. (1.5m) and 7 ft. (2m).

Subwoofer

Since the installation of a subwoofer can be somewhat more
complicated than installing full-range speakers, it is essential that
you read this section very carefully prior to connecting the
subwoofer to your system. Should you have questions relating to
installation, it is advisable to call either your dealer or Infinity’s
Customer Service Department for advice.

The performance of the subwoofer is directly related to its
placement in the listening room and how you align the subwoofer
with the satellite speakers. Setting the volume of the subwoofer in
relation to the left and right speakers is also of critical importance
because it is essential that the subwoofer integrate smoothly with the
entire system. Setting the subwoofer’s volume level too high will
result in an overpowering, boomy bass. Setting the volume level too
low will negate the benefits of the subwoofer.

Here are several additional facts on installation that may prove
useful. It is generally believed that low frequencies (below 125Hz)
are nondirectional and, therefore, placement of a subwoofer within
any listening room is not critical. While in theory it is true that the
larger wavelengths of extremely low frequencies are basically
nondirectional, the fact is that, when installing a subwoofer within the
limited confines of a room, reflections, standing waves and
absorptions generated within the room will strongly influence the
performance of any subwoofer system. As a result, specific location
of the subwoofer becomes important, and we strongly recommend
that you experiment with placement before choosing a final location.
Placement will depend upon your room (for example, whether or not
your room permits placement of the subwoofer near either satellite)
and the amount and quality of bass required.

LACEMENT

Using the Satellite on the Shelf Stand

To attach the satellite to the shelf stand, hold the satellite on top of
the stand and insert the two included screws through the rear of the
stand and into the rear of the speaker.

The TSS-800 satellites and center channel are designed to be
mounted on the wall. There is a fixed-mount wall bracket and an
adjustable wall bracket provided for each satellite and the center
channel. Each speaker bracket will require up to four 1-1/2" #10
wood screws; each screw should be fastened to a wall stud. If a wall
stud is unavailable, install an anchor appropriate for a 1-1/2" #10
screw.

NOTE:

The customer is responsible for the correct selection

and use of mounting hardware (available through hardware stores)
that will ensure the proper and safe wall-mounting of
the speakers.

Fixed-Mount Wall Bracket

Step 1.

Mark the positions on the wall where you would like to place

the mounting screws.

Step 2.

Attach the back plate of the bracket to the wall using three

screws (not included).

Step 3.

Attach the front plate (with the spring tab) of the bracket to