Infinity SR-TWDN620SA, Инструкция по эксплуатации

Страница: 13 / 19

22 | SR-WDN620 SA/SD; SR-TWDN620 SA/SD SR-WDN620 SA/SD; SR-TWDN620 SA/SD | 23
ENG
OSD INSTRUCTION
Press the set button to access “Main Setup” mode of OSD. •
Select the desired feature by using Joystick S/W with Up / Down direction. •
Change the status of the selected feature by using Joystick S/W with Left / Right direction. •
When you finish the camera setup, put the arrow indicator to “Exit” and press “Joystick S/W” •
Remark : “
⏎
“ indicates Sub-Menu existing. Press “Set Button” to access “Sub-Menu”.
Select the function by using Joystick S/W with Up /Down direction. •
Change the status by using Joystick S/W with Left / Right direction. •
Entitle Camera Name (ID) and it will be appeared on the screen. •
Select CAM Name by using Joystick S/W with Up/Down direction •
Set it to ON by using Joystick S/W with Left / Right direction. Then press SET BUTTON. •
Remark : If the CAM Name is OFF, no Name will be displayed on the monitor.
Use Joystick S/W with 4 direction to select a desired letter and press “SET Button”. •
Repeat this process each by each. 15 letters can be edited.
After entering the title, move the cursor to POS and press SET Button. Select the position •
to display the title on the screen by using Joystick S/W with 4 direction . Press SET Button.
When the position is determined, select END and press SET Button to return the SPECIAL
Menu.
5. OSD INSTRUCTION
5.1
CAM NAME
OSD INSTRUCTION
DC IRIS: Select this mode when DC Auto Iris lens is used. Press the joystick S/W to enter the
sub menu. The brightness can be adjusted.
MANUAL
Select this mode when Manual Lens is used.
Select “Exposure” by using Joystick S/W with Up / Down Direction. •
Press “ Set Button” to enter “Exposure Setup” •
AGC (AUTO GAIN CONTROL)
The higher gain level, the brighter pictures, but the higher noise.
Off : Deactivate AGC function •
Low / Middle / High : Set the desired AGC Level. •
SHUTTER : AUTO / MANUAL SHUTTER CAN BE SELECTABLE
A. FLK : Select this when picture flickering. The picture flickering can be caused by a clash •
with the frequency of the installed lighting.
ESC : Select this to control the shutter speed automatically. In terms of ESC, the shutter
•
speed is automatically controlled depending on the ambient illumination of the subject.
Manual : You can control shutter speed manually from 1/160~1/90000 Also control from X2
•
~ X512.
5.2
LENS
5.3
EXPOSURE