![Infinity PRELUDE FORTY Скачать руководство пользователя страница 4](http://html1.mh-extra.com/html/infinity/prelude-forty/prelude-forty_owners-manual_2056591004.webp)
4
INFINITY PRELUDE FORTY
P
LACEMENT
The Infinity Prelude Forty loudspeaker is designed to offer excellent
performance in any listening room. However, the following placement
guidelines and suggestions will start you on your way to achieving optimum
performance. Remember, these are guidelines. It is suggested that you
experiment with positioning the loudspeakers to determine their ideal
placement in your particular listening room. Generally, the speakers
should be placed at least 3' away from the side walls. The two speakers
should be equidistant from your primary listening position. It is recommended
that the angle formed between the speakers and the listening area be
between 45° and 60.° For example, if the speakers are 8' apart, your
listening position should be 8' to 10' from each speaker. See Figure 6.
With wider speaker separations, it may be advantageous to slightly angle
the speakers, aiming them toward the listening area.
Figure 6.
Left
Channel
Right
Channel
Primary Listening
Area
W
IRING THE
S
YSTEM
IMPORTANT: Make sure all equipment is turned off before making any
connections.
For speaker connections, use a high-quality speaker wire with polarity
coding. The side of the wire with a ridge or other coding is usually
considered positive polarity (i.e., +).
NOTE:
If desired, consult your local Infinity dealer about speaker wire
and connection options.
To ensure proper polarity, connect each + terminal on the back of the
amplifier or receiver to the resp (red) terminal on each speaker,
as shown in Figure 7. Connect the – (black) terminals in a similar way.
See the owner’s guides that were included with your amplifier or receiver
and television to confirm connection procedures.
IMPORTANT: Do not reverse polarities (i.e., + to – or – to +) when
making connections. Doing so will cause poor imaging and diminished
bass response.
Figure 7. This figure shows how to connect bare wires to the terminals.
1.
Open the terminals by twisting the cap counterclockwise.
2.
Insert the bare end of the wire into the hole in the post.
3.
Tighten the cap by twisting clockwise until secure.
Figure 8. This example shows how to connect bare wires to the terminals.
Banana plugs may also be inserted directly into the rear of the connector.
Amplifier
0054CSK - Infinity Prelude Forty_ENG v2.qxd:Prelude40 OM 12/09/08 10:33 Side 4 (Sort/Black plade)