Infinity PHI 21, Руководство пользователя

Страница: 7 / 12

7 P
HI
51 - P
HI
21
Rear Panel
S
UBWOOFER
C
ONTROLS
Subwoofer-Level Control
Crossover Adjustment
Phase Switch
Power Mode Switch
Sub Trigger Input
Line Level Input
High Level Input
Power Switch
Voltage Switch
A Few Suggestions
We recommend that you do not operate your speakers or subwoofer with
the bass, treble and loudness controls set to full boost. This will place
undue strain on your electronics and speakers and could damage them.
The volume control setting on your processor/preamp or receiver is not a
specific indication of the overall loudness level of the speakers. The only
important consideration is the loudness level at which the system can be
played, regardless of where the volume control is set.
Always turn down the volume control setting on your processor/preamp or
receiver when changing a cassette or CD, or switching inputs to AM or FM
operation. Excessively loud transients (clicks or popping, sounds) can
damage the satellite speakers and, possibly, the subwoofer.
Important!
Whenever changing cables, pulling plugs, etc., ALWAYS TURN OFF ALL
EQUIPMENT, including the subwoofer.
The PHI Subwoofer is equipped with a Voltage Switch . This switch is
preset to the correct voltage for the part of the world where it is sold.
Always make sure that this switch is in the correct position, according to
the voltage in your country (240v is standard position). Use a screwdriver
to move this switch if you move to a country with different voltage.
ENGLISH