15
www.infinityvac.com
English
fe
ff
g
h
i
k
j
Part Part
No.
Motor Belt
1102-FP
Headlight Bulb
1088-FP
Foam and Felt Filters
1083-FP
HEPA Filter
1082-FP
Telescopic Wand
1121-FP
Detachable Handle
1119-FP
Super Stretch Hose
1120-FP
Upper Hose Holder
1086-FP
Crevice Tool
1084-FP
Upholstry/Dusting Brush
Pet Hair Power Brush
1097-FP
Low Reach Bare Floor Brush
To replace new Belt:
Slide one end of the new Belt over the
motor-driven shaft (
e
).
Slide second end of the Belt around
Brush Roll (
f
).
Partially insert the right end of the roller
into one side holder (
g
).
Partially insert the left end into the other
side holder (
h
).
Push both ends all the way into the side
holders at the same time.
Center Belt on motor-driven shaft; test
Brush Roll for easy turning.
Line up the 4 tabs on the Belt and Brush
Roll Cover with the slots on the Power
Nozzle (
i
); push into place.
Turn the three locking screws clockwise
(
j
) to tighten.
Cleaning the Pet Hair Power
Brush
Slide locking latch (
k
) forward.
Gently tilt brush housing upward to open.
IMPORTANT: DO NOT
force; it will not
open all the way.
Remove debris from turbine wheel and air
passage.
Ordering Replacement Parts
To order additional parts and accessories,
go to
www.infinityvac.com
or call
1-888-668-9600
.
Note:
some parts may
be available at your local Infinity retailer.