Infinity Kappa 65.1mb, Инструкции

Страница: 3 / 3

- 3 -
A N
OTE ON
P
OWER
H
ANDLING
Kappa speakers are designed to produce reason-
able volume levels with little amplifier power.
However, the addition of an amplifier to drive
your speakers and a subwoofer will enhance the
dynamic range of your system, and help over-
come the ambient noise in a moving vehicle.
Kappa speakers are designed to handle the
power of a dedicated amplifier driven at or below
its rated power. If an amplifier is driven far above
its rated power, the output signal will “clip”, and
the additional power present in a clipped signal
can damage any speaker. Distorted or “fuzzy”
sound from your speakers is an indication that
the amplifier has exceeded its rated power, and
you should reduce the volume level.
S
PECIFICATIONS
65.1mbi
Type: 6" Midbass
Speaker Impedance: 4 ohms
Power Handling: 100W
Frequency Response: 40Hz ~ 2.5kHz
Sensitivity: 89Hz @ 2.83 V,
Mounting Depth, Drop-in: 2-7/16" (62 mm)
Cut-out Diameter:
5-1/8" (131 mm)
G
ENERAL
C
ARE
The loudspeaker grilles may be cleaned with a
slightly damp cloth. Do not use any cleaners or
solvents on the grilles or the speaker drivers.
DECLARATION OF CONFORMITY
We, Infinity Systems A/S
Kongevejen 194B
DK-3460 Birkerød
DENMARK
Steen Michaelsen
Infinity Systems A/S
Birkerød. DENMARK. 2/98
declare in own responsibility, that the products described in this owner’s manual are in compliance with technical standards:
EN 50 081-1/1992
EN 50 082-1/3.1995
®
Infinity Systems, Inc. • 250 Crossways Park Drive,
Woodbury, NY 11797 USA • (516) 496-3400 • FAX (516) 682-3583
Kappa 65.1mb OM 7/14/98 10:18 AM Page 3