INFINITY IYASHI MASSAGE CHAIR
QUICK START GUIDE
Once your chair is plugged in and the power button on the rear lower panel is in the on
position, you can begin using your massage chair. Start by pressing the power button
on the upper left of your remote.
Auto Programs
- You can choose one of the six auto programs by selecting the auto
button on the remote. 1)
Recover
2)
Refresh
3)
Extend
4)
Relax
5)
Upper Auto
6)
Lower Auto.
The programs take you through a fully automated massage each
addressing your specific needs. The massage time can be adjusted by selecting the
desired time in the menu under settings. Auto timer options are 10, 20, and 30
minutes.
Custom Massage -
After pressing the power button then press the “
Menu
” button
directly below the power button. From the menu select manual then mode then one of
the six roller massages 1)
Kneading
2)
Tapping
3)
Knocking
4)
Shiatsu
5)
Sync
(tapping and knocking)
6)
Rhythm (Sync to music coming in through Bluetooth)
.
While enjoying any custom massage, you can further customize by selecting the
manual options available in the menu for “
Part”
and/or “
Width
” and/or “
Speed”.
To enjoy a foot massage, activate the foot rollers with the “
Rollers
” menu option. The
three speeds can be changed in this menu.
Select “
Heat
” from the menu to activate the Lumbar Heat. Allow a few minutes for the
heat benefits to be felt.
Music
– Relax to your own music selection using a music compatible Bluetooth
device. Using your bluetooth device, you can pair with the chair allowing it to stream
your music through the stereo system built into Iyashi. Volume is controlled from the
music device. Music selection is done from the music device.
INFINITY IYASHI MASSAGE CHAIR
QUICK START GUIDE
Infinite Therapeutics 68 Route 125 Kingston, NH 03848 (603) 347-6006
