Infinity ISE-XH30/36ZWDN650 FD, Инструкция по эксплуатации

Страница: 27 / 35

50 | ISE-XH30(36)ZWDN650 FD ISE-XH30(36)ZWDN650 FD | 51
ENG
The Straight Tube is available in different length: 25 cm and 30 cm.
ITEMS NEEDED:
Dome Camera •
Outdoor Mount Kit (supplied) •
Data Cable (supplied) •
Ethernet Cable (network Dome Camera) •
Compact Pendent Mount and equipped items (optional accessory) •
Waterproof Rubber (supplied) •
M5 Standard/Security Screw (supplied) •
Screws and Screw Anchors for fixing the Compact Pendent Mount (not supplied) •
TOOLS NEEDED:
Tool for drilling •
Tool for screwing •
Follow the steps to mount the Dome Camera with the Straight Tube.
Ensure that the ceiling can support the weight of the Dome Camera and Straight Tube. •
Make a cable entry hole on the ceiling. •
Fix the Straight Tube to the ceiling with proper screws and screw anchors. •
Attach the Waterproof Rubber to the Straight Tube. •
Run the cable(s) through the Straight Tube with the Data Cable’s 22-pin cable coming out of the outlet. •
Note : After running the cable(s) through the Straight Tube, please block the Tube’s outlet with the supplied
sponge to avoid insects entering the tube.
Thread the cable(s) through the Outdoor Mount Kit and join the Indoor Mount Kit to the Straight Tube with the •
supplied screws and washers. Then adjust the Waterproof Rubber to the joint.
Connect the cable(s) to the Dome Camera.
•
Join the Dome Camera to the Outdoor Mount Kit with the supplied screw and washers. •
Ceiling Mount: Straight Tube + Outdoor Mount Kit
ITEMS NEEDED:
Dome Camera •
Outdoor Mount Kit (supplied) •
Data Cable (supplied) •
Ethernet Cable (network Dome Camera) •
Compact Pendent Mount and equipped items (optional accessory) •
Waterproof Rubber (supplied) •
M5 Standard/Security Screw (supplied) •
Screws and Screw Anchors for fixing the Compact Pendent Mount (not supplied) •
TOOLS NEEDED:
Tool for drilling •
Tool for screwing •
Follow the steps below to mount the Dome Camera with the Compact Pendent Mount.
Make a cable entry hole on the wall to recess the cables. Otherwise, users could push up the Cable Entry Board •
on the Compact Pendent Mount’s Mounting Plate to place the cables, as shown in the photo below.
7.4
WALL MOUNT
7.4.1
COMPACT PENDENT MOUNT
DOME CAMERA INSTALLATION
7.3
CEILING MOUNTING WITH STRAIGHT TUBE
Fix the Compact Pendent Mount on the wall with proper screws and screw anchors. •
Attach the Waterproof Rubber to the Compact Pendent Mount. •
Run the cable(s) through the Compact Pendent Mount with the Data Cable’s 22-pin cable coming out of the •
outlet.
Note: Please block the cable entry hole with the supplied sponge to avoid insects entering the Pendant
Mount. The sponge can be placed in two ways as shown in the illustrations below.
Mounting Plate
Cable Entry Board
Sponge
Sponge
DOME CAMERA INSTALLATION