Infinity IPB-TDN540 SLHP, Инструкция по эксплуатации

Страница: 7 / 11

10 | IPB-TDN540 SLHP IPB-TDN540 SLHP | 11
ENG
PRODUCT DESCRIPTION PRODUCT DESCRIPTION
1. PRODUCT DESCRIPTION
This manual applies to the Network Camera.
The Network Camera supports the network service for an existing analog camera. An analog image entered can be
monitored on a real-time screen regardless of distances and locations. By using its dedicated program, many users
are able to have an access to the Network Camera at once or a single user can monitor various network cameras
at the same time. It also enables users to play, store and retrieve a monitoring image by using a PC. All the settings
and real-time monitoring screens are also provided through an access to the web.
The Network Camera is a one-port video Camera including two-way audio, fully featured for security surveillance and
remote monitoring needs. It is based on the DSP compression chip, and can digitize one analog video source and
make it available on the network as real-time, full frame rate Motion JPEG and H.264 (or MPEG-4) video streams.
The alarm input and alarm output can be used to connect various third party devices, such as, door sensors and
alarm bells.
REAR VIEW
LED Indicators
Follow these steps to install the Network Transmitter on your local network (LAN):
Check the package contents against the list below. •
Connect the Network Camera. •
Set an IP address. •
Set the password. •
Contents in the installation CD
The Network Camera User’s Manual •
The NautilusClient16 User’s Manual •
The NautilusServer User’s Manual •
The NautilusClient16 Installation software •
The NautilusServer Installation software •
1.1
INSTALLATION STEPS
1.3
VIEW
1.2
PACKAGE COMPONENTS
№ Function Описание
1
Power adaptor terminal
Connects the supplied power adapter or an external
power supply 12V DC or 24V AC, max. 6.5Watt.
RS485 terminal Connects PTZ or PT device.
2 Status Indicator Indicates camera status.
3 Power Indicator Indicates power input.
4 Video Out Connects the video output. This BNC connector
provides a 1.0Vp-p/75 ohms composite video signal.
5 6pin Terminal I/O Connects alarm In/Out, audio In/Out.
6 Reset Button Executes the factory default.
7 Network connector (PoE) RJ-45 port compatible with 10/100Mbps, which have a PoE function.
LED Color Indication
Network
Green Steady for connection to a 100 Mbit/s network. Flashes for network activity.
Amber Steady for connection to 10 Mbit/s network. Flashes for network activity.
Unlit No network connection.
Status Red Steady red for failed upgrade or booting.
Power Green
Steady green for normal operation or booting.
Flashes green during firmware upgrade.
№ Function
1
Focus adjusting fixing
screw
2 Auto IRIS lens connector
3 Setup Buttons
1 2 3
1
2
3
4
5
6
7
FRONT VIEW