Infinity Infinity iW-1941RDM, Руководство пользователя

Страница: 12 / 56

11
Ordercode: 41529
Infinity iW-1941 RDM
Installation
Remove all packing materials from the Infinity iW-1941 RDM. Check that all foam and plastic padding is
removed. Connect all cables.
Do not supply power before the whole system is set up and connected properly.
Always disconnect from electric mains power supply before cleaning or servicing.
Damages caused by non-observance are not subject to warranty.
Lock/Unlock the Moving Head
You can lock the moving head by sliding the lock pin to the left (horizontally) for Pan or upwards
(vertically) for Tilt (Red arrows). You can unlock the moving head by sliding the lock pin to the right
(horizontally) for Pan or downwards (vertically) for Tilt (Green arrows).
Fig. 04
Set Up and Operation
Follow the directions below, as they pertain to your preferred operation mode.
Before plugging the unit in, always make sure that the power supply matches the product specification
voltage. Do not attempt to operate a 120V specification product on 230V power, or vice versa.