PEDALS AND CRANKS
achment of an incorrect pedal into a crank arm can strip pedal threads and
cause irr
pedals are a
Look for the le
Start each pedal spindle by hand to avoid stripping the threads. (Note that the
ri
(clockwise) thread. The le
hand (counter-clockwise thread). Tighten with a 15mm narrow open ended wrench.
It
before riding your bicycle.
Dust
cap
SADDLE ASSEMBLY
The seat pos
be seen. The quick release mechanism mus
ailure to do this may cause loss of
bicycle control.
The saddle assembly should be adjusted with the saddle centered on the rails and
level. Locate the saddle assembly and insert into the frame. It is recommended to add
some grease to all threads and binders on a bicycle, especially on the outside of the seat
po
Bolted Seat Clamp
If your bicy
the clamp so that the saddle ma
th
mark on the seat post. Riding a bicycle with the seat post above this line is dangerous
and can cause injury to the rider or damage to the bicycle or create an unstable riding
t.
Quick Release Seat Clamp
If your bicycle has a seat clamp with a quick release, adjust seat to desired height, and
up or down. If the saddle mo
th
mark on the seat post. Riding a bicycle with the seat post above this line is dangerous
and can cause injury to the rider or damage to the bicycle or create an unstable riding
Seat clamp
Quick release
Seat post
Rails
www.infinitycycleworks.com
copyright 2018 - Infinity Cycle Works Ltd.
