Infinity 55008, Руководство пользователя

Страница: 18 / 20

17
Peanut Box
Product code: 55008
7. Troubleshooting
This troubleshooting guide contains solutions to problems which can be carried out by an ordinary
person. The device does not contain user-serviceable parts.
Unauthorized modifications to the device will render the warranty void. Such modifications may result in
injuries and material damage.
Refer servicing to instructed or skilled persons. Contact your Highlite International dealer in case the
solution is not described in the table.
Problem Probable cause(s) Solution
The device does not
function at all The metal ring around the
power plug is loose ● Tighten the metal ring around the
power plug
The device does not
appear on the list of
available devices on the
Chimp’s display (or on the
PC screen)
The device is not properly
connected to the Chimp/PC
● Check if the USB cable is properly
connected to the Chimp/PC
● Replace the USB cable
Your Chimp’s software version
is lower than 2.0
● Install the newest software version
8. Maintenance
Preventive Maintenance
Attention
Before each use, examine the device visually for any defects.
Make sure that:
● All screws used for installing the device or parts of the device are tightly fastened and are not
corroded.
● The safety devices are not damaged.
● There are no deformations on housings, fixations and installation points.
● The lens is not cracked or damaged.
Basic Cleaning Instructions
To clean the device, follow the steps below:
Disconnect the device from the electrical power supply.
Remove the dust collected on the external surface with a soft brush.
Attention
● Do not immerse the device in liquid.
● Do not use alcohol or solvents.
● Make sure that the connections are fully dry before connecting the device to the power supply and
to other devices.