INSTRUCTION MANUAL FOR OSCILLATING WALL FAN
WARNING:
To reduce the risk of fire or electric shock, do not use this fan with any solid-state core roller.
In case of failure or damage. Refer to the local service center or distributor. Do not try to maintain
yourself.
READ AND SAVE THIS INSTRUCTION MANUAL
IMPORTANT INSTRUCTIONS:
Read all instructions before using this unit.
Always unplug unit before assembly disassembly.
Always unplug unit when not in use.
Do not use unit outdoor.
Do not allow unit to become wet or damp.
Sect fasten front guard onto rear guard.
Main replaceable components or spare parts.
SAVE THESE INSTRUCTIONS
PARTS DIAGRAM
For shipping purpose the fan is packed & disassembied.
1
Front guard
2
Blade cap
3
Fan blade
4
Rear guard mounting nut
5
Rear guard
6
Motor
7
Oscillating pin
8
Swivel joint
9
Power cord
CLEANING AND MAINTENANCE
Before cleaning, turn off the fan and disconnect the power cord from the power socket.
Wipe the surface of the fan using a clean and dry wiping cloth. In the event that it is more dirty,
disassemble the fan and wipe the individual parts (not the power plug) with a wiping cloth
slightly dampened in a solution of the warm water and neutral detergent. Then thoroughly wipe
all parts until dry. Take care not to allow water to enter the motor unit or the dial panel when
cleaning.
Do not use abrasive cleaning products, petrol, solvents, etc. For cleaning.
If the fan will be using for a longer period of time, store it in a clean, dry location that is out of
reach of the children.
Model
Voltage
Frequency
Wattage
WN-42R
220-240 VAC
50 Hz
60 W
