Infiniton MICA HMK-31, Руководство пользователя

Страница: 7 / 23

Assembly
1. Taking the heating body and all accessories out from the package.
2. Put the heater on a soft surface with up on bottom position.
3. Attach the two feet to the bottom, and fix it with the provided screws at the help of the
screw tool, each foot with 3 screws (Fig. 2)
Fig.2
Operation
1. After assembly the feet to the body, put the heater on up right position
2. Connect to the socket with voltage 230V 50Hz
3. Rotate the thermostat knob from “min” to “max” position, when you hear a “click” sound,
then the heater has been connected.
4. Then rotate the switch knob to choose the power “I” 1200W, and “II” 2000W
Maintenance:
1. Always disconnect the appliance and let it completely cool before any
maintenance.
2. Use a vacuum cleaner to remove dust on grilles.
3. Clean the outside of the unit with a damp cloth and then dry it with a dry cloth.
Never immerse the unit in water, nor let water drip into the unit.
Overheat Safety Device:
Your heater is fitted with a safety device to switch off the heater in the event of
overheating. If the safety device operated, please turn the heater off, unplug the
appliance and let it completely cool, inspect for blockage of air inlet or outlet,
attempting to restart the heater then after.
If the heater fails to operate or the safety device switches the heater off again,
return heater to your nearest service center for examination or repair.
Storing:
1. Always disconnect the appliance, let it completely cool and clean it before
storing.
2. If you do not use the device for a long period, put back the unit and the
instruction manual to the original carton and store in a dry and ventilated place.
3. Do not place any heavy items on top of carton during storing as this may
damage the appliance.