Infiniton HCW-5207, Руководство пользователя

Страница: 22 / 40

9) .Press” / “to setting the target temperature(Temperature range 10-49 ℃ ),
10) Repeat steps 2-7 above, you can set the whole weekly program (& Each day, the work of
each segment opens, the time of shutdown).
9) After above setting, press “ “ choose the unit turn-on day of the week, then press
“ “ to choose the turn-on time of the day, then Press ” / “ to set desired
temperature (temperature range 10-49 ℃ ), press ” “ to confirm the setting.
9). To cancel the weekly function, press the " " agian , the light "P" will go off. The weekly
program is off. The product will revert to the previous function working status.
Note:
-After the above setting are completed and P program is working,press” “to check the
setting time of each day and time periods,
- The turn-on time periods 00~24hours, cannot set to minutes ;
-The“TIME/OFF”can not be less than“TIME/ON”;
-When the“TIME/ON” is the same as“TIME/OFF”, the time period enter into standby
mode;
Note: If main switch off ,power cut off, or plug out, it need reset . You can press to check
you set Time /Day.
Set open-window detection(ONLY by remote control) ：
1). Press“ “， the product enter into working status. Heating for a moment untill stable.
2). Press” ” by remote control,light “ / ℃ “ will on; The temperature
display”23”by default.Press” / “to set target temperature. During open-window
detection mode,
once the ambient temperature drops 5-10 ℃ within 10 minutes, then the
product will stop working within 30 minutes and enter into stand by mode. Then press
“
”to turn on the product.