3. Hold the side of the product, look at the position of the wall hole of the rear cover, and slide the
wall to the top of the slot, that is, the installation of the wall is completed, as depicted in the picture
below.
Note:
Prior to the drilling
,
make
sure there is no cable
or
other pipelines on the wall
to avoid damage.
Remember
that the screws on the wall
shall be
fixed and firm to ensure the safety
install
ation
of
the
electric heater
o
n the wall. Please note the
safe distance mentioned below.
During
installation
,
the heater
must be
maintained
sufficiently safe distance
from
combustible
materials and gas
and
away from water.
During
wall
-
hanging installation,
keep the
installation height from the ground
greater than
15 cm.
Hanging
-type
heater
shall
be
no less than 50 cm
away
from the ceiling
.
