10
English
Troubleshooting
Whenever there is a problem with the appliance, check if you can solve it by following the tables below.
If the problem persists, please contact customer support.
PROBLEM
POSSIBLE CAUSE
SOLUTION
Light on, but motor does not work
Fan switch turned off
Fan switch failed
Motor failed
Select a fan switch position.
Contact service center.
Contact service center.
Light does not work, motor does
not work
House fuses blown
Power cord loose or
disconnected
Reset/Replace fuses.
Refit cord to power outlet.
Switch power outlet on.
Oil leakage
One way valve and the outlet are
not tightly sealed
Leakage from the connection of
chimney and cover
Take down the one way valve
and seal with sealant.
Take chimney down and seal.
Lights not working
Broken/Faulty globes
Replace globes as per this
instruction.
Insufficient suction
The distance between the cooker
hood and the gas top is too far
Refit the cooker hood to the
correct distance.
The Cooker hood inclines
The fixing screw not tight enough
Tighten the hanging screw and
make it horizontal.
Note:
Any electrical repairs to this appliance must conform to your local, state and federal laws.Please
contact the service centre if in any doubt before undertaking any of the above.Always disconnect the
unit from the power source when opening the unit.
