8
USING THE THERMOSTAT AND POWER SWITCHS
1
、
Room temperature can be adjusted using the thermostat. . Simply turn the thermostat
knob clockwise to increase the heat and anti-clockwise to decrease the temperature until
you reach the desired temperature.
1
、
Switch the heater to one of the following power settings.
A)07fins: Push switch one (I) for 600W
Push switch two (II) for 900W
Push switch one
&
two (I
&
Ⅱ
) for 1500W.
B)09fins: Push switch one (I) for 800W
Push switch two (II) for 1200W
Push switch one
&
two (I
&
Ⅱ
) for 2000W
Note: this radiator heater is oil fitted. And will cool down slowly after the power is shut off.
Allow the radiator heater to cool prior to any movement, the carry handle should be used for
easy movement.
1
、
The switch lights up when turn on
2
、
Turning the thermostat control clockwise will increase the “set” temperature.
3
、
Turning the thermostat anti-clockwise will decrease the “set” temperature.
4
、
Do not cover the heater at any time during operation. There is a risk of fire if the heater
is covered.
5
、
Once you have finished using your heater. Turn off the power switches, and the
thermostat control switch to the “0”positions. And unplug from the mains supply.
CLEANING YOU OIL RADIATOR
1
、
Always disconnect the heater from the mains supply before cleaning.
2
、
Clean the outside of the heater by wiping with a damp cloth and buff with a dry cloth.
3
、
DO NOT use waxes or polishes as these may react with the heater and cause
Discoloration.
STORING YOUR OIL RADIATOR
1
、
Save the box for off-season storage.
2
、
Clean the heater following the cleaning instructions above.
3
、
Remove the wheel base assemblies.
4
、
Place the heater and wheel assemblies in the original box, and store in a cool, and dry
