STEP 1:
Take the two base shells and run the mains plug and power supply cord on the tower fan
through the openings in each. Make sure that the power cord is inserted through the guide to
allow the tower fan to stand flat on the floor.
STEP 2:
Fit together the two base shells to form the base with the power cord not secured into
position and then insert the four base screws, tightening in a clockwise direction to secure.
STEP 3:
Attach the base onto the bottom end of the tower fan so that the locking tabs align with
the corresponding slots. Twist the base-locking collar in an anticlockwise direction to secure it
into position. When assembled, the base should curve downwards and sit flat when the tower
fan is upright.
Instructions for Use
Before connecting to the mains power supply, place the assembled tower fan onto a flat, stable
surface, allowing for sufficient distance between the tower fan and any objects that could get
damaged or caught in the rotating fan blades.
Using the 29 inch tower fan
STEP 1:
Plug in an switch on the tower fan at the mains power supply.
STEP 2:
To turn on the tower fan, select the desired cooling speed by pressing the adjustable
cooling speed buttons. Speed setting “3” is the highest cooling speed setting.
STEP 3:
To use the tower fan for a set period of time, turn the timer control dial in a clockwise
direction to select the desired time. Once set, the timer control will run its course but can be
interrupted and stopped by turning the timer control dial in an anticlockwise direction to the
“OFF” POSITION.
STEP 4:
Activate the oscillation function by pressing the oscillation switch to “I”. Press the switch
again “0” to deactivate the oscillation function.
STEP 5:
Turn off the fan by pressing “0” and turning the timer control dial in an anticlockwise
direction to the “OFF” position.
Specifications
Product code:
Voltage: 220-240V
～
50Hz
Output: 45W
Notes
Connection to the mains
Please check that the voltage indicated on the product corresponds with your supply voltage.
Note:
It may be necessary to lay the tower fan on a flat, stable surface to attache the base.
Caution:
Do not cover the tower fan.
This is not a desk fan. Do not place this fan onto a desk as this could affect the stability of the
product.
