Infinite ZI250B, Руководство пользователя

Страница: 9 / 26

-9-
Chapter Three: Arming and Disarming
Arming can be defined as activating the system. When the system is armed, it monitors
the zones that are protected by the sensors. If a sensor detects an intrusion, the system
generates an alarm.
Certain sensors, such as smoke sensors, are always active regardless of system status.
3.1: Arming the System
Three arming modes are available: Full, Part and Perimeter. These modes enable you to
arm your system accordingly to suit different circumstances.
Full Arming
Full arming activates the entire system. This arming method is used
when you intend to leave your home, leaving the premises empty.
Part Arming
This arming method enables you to arm a section of your home while
remaining on a different part of the premises.
Perimeter Arming
Perimeter arming enables you to activate the perimeter zones (the
windows and doors of your home) enabling you to move freely within
the protected area.
Before arming the system, check that all doors and windows are secured so that the
system is ready for arming.
To arm the system using the keypad:
•
Press one of the three arming keys; the exit delay begins to count down. At the
end of the exit delay, the system is armed.
,
If the One-key Arming option is disabled in programming, you must enter your user code
when arming the system.
To arm the system using a keyfob:
•
Press the relevant button on your keyfob (see 2.2: Keyfobs); the exit delay
begins to count down. At the end of the exit delay, the system is armed.
Forced Arming
Forced arming enables you to arm when the system is not ready. For example, if a door
protected by a magnetic contact is open, you may arm the system on condition that the
door will be closed by the end of the Exit delay. If the door is still open after the exit delay
expires, an alarm is generated.
,
Forced arming is available only if the option is enabled in programming. Forced arming
may be enabled for specific zones or for the entire system.