800.882.9110 | 208.772.8515 | www.transtector.com
CCTV-PTZ Series
1. Mounting the CCTV-PTZ Series (See Figure 1)
1.1 Mount suppressor as close to protected equipment as
possible.
2. Wiring the CCTV-PTZ (See Figure 2)
2.1 The CCTV-PTZ is designed to protect one coax video
signal and 24V Power + 2 Wire Data.
2.2 The power ground must be connected to provide coax
protection.
3. Wiring the CCTV-PTZ-4 (See Figure 3)
3.1 The CCTV-PTZ-4 is designed to protect one coax
video signal and 4 Wire Data.
3.2 One of the four common grounds must be connected
to a ground to provide coax protection.
1200-306 Rev D
