Step 2-2:
Or the Switch, as shown in the picture below, can be hung on the wall by screwing the two screws leaving a
space of 2mm apart after the anchors are hammered in.
3.2 DIN-rail Mounting Installation
The DIN-rail kit is included in the Wall-mount Gigabit Switch package. To hang up the Wall-mount Gigabit Switch,
follow the steps below:
Step 1
: Screw the DIN-rail bracket on the Wall-mount Gigabit Switch.
Step 2
: Lightly press the bottom of DIN-rail bracket into the track.
Step 3
: Check whether the DIN-rail bracket is tightly on the track.
