Infinite Pasternack PE5CK1021 Скачать руководство пользователя страница 5

 

 

 

© 2020 Infinite Electronics, Inc., Pasternack is a registered trademark of Infinite Electronics, Inc. 

 

 

 

              5 

 

Connector Description 

Precision 7/16 DIN connectors are instrument-grade connectors that operate mode-free up to 7.5 GHz. 

They feature extremely low VSWR and insertion loss and are designed to non-destructively mate with 

standard 7/16 DIN connectors.  

 

Connector Care 

Precision connectors must be handled carefully if accurate calibrations and measurements are to be 

obtained. All connectors should be inspected prior to each use. For optimal  measurement results, all 

interfaces should be visually inspected under magnification and cleaned on a regular basis. Proper 

connector contact pin depths should also be verified through regular inspections using a connector gage 

kit to ensure that connectors on both calibration devices and devices under test (DUTs) have contact pin 

depths within recommended tolerances.  
Care should be used whenever aligning connectors. Tighten connector coupling nuts using an appropriate 

torque wrench while holding the opposing connector with an open-end wrench. 
When disconnecting devices, take care not to rock or bend any of the connections. Disconnect devices by 

disengaging the coupling nuts and gently pulling the connectors apart in a straight line. 
Always use protective covers on all connectors when devices are not in use. 
Should a connector become damaged, it should be repaired before it is used again or replaced immediately. 

A damaged connector can damage other mated connectors.

 

 

Содержание Pasternack PE5CK1021












Отзывы: