Infinite FINA250, Руководство пользователя

Страница: 58 / 70

FINA250
用户手册
- 54 -
11.3.3 Adjustment of Step Correction
Open file: C:\try\SmallGrid126.group ， “printing option” select test mode, single direction, “C” color.
Click “ ”button to print, adjust the value in Adjustment \ Rectangle till the printing pattern is even grid
and lines aligned, then save the value.
If the printing pattern has interval, reduce the value, if pattern overlap increase the value. Other step
corrections in different modes are the same way above.
Observe the step using magnifying loupe:
Figure 11-12 Step Adjustment
Step corrections are different according to different printing modes, so each printing mode should be
corrected.
If certain mode is in common use, users can print in the mode and adjust ht value in Adjustment \ Rectangle.