Infinite Play ZK171, Инструкция по установке и эксплуатации

Страница: 4 / 18

4
EN
KIT
DESCRIPTION:
Audio-video entrance panel for INFINITEPLAY video door entry
systems.
ENTRANCE PANEL INSTALLATION
ART . Z1001 - Z100D
Installing from semi-surface mounted:
• Install a flush box of universal type (InfinitePlay ZT503 - Vimar
V71303 - Bticino 503E) in vertical position at a height of 160 cm from
the floor to the top edge, as shown in the figure.
• Fix the chassis frame to the box using the 2 +4 screws
• Insert the card names and close the lid
• Wire the electronics assembly as shown through the RJ45 connector
• Secure the plate using the 4 screws to the chassis frame
• Compatible with flush-mounted back box Elvox Art 9192 and Art
Vimar 02011
PLEASE NOTE: The equipment must be directly and permanently
mounted on a non-combustible surface such as concrete and metal.
Supports or materials with poor self-extinguishing requirements must
be excluded.
Description connection terminal block:
• Line entrance panel with RJ45 connector
• Interconnecting cables used must be compliant with the CEI 64/8 for
video door entry systems:
- UTP CAT 5e for domestic routes dedicated to video door-phone
system
- FTP CAT 5e shared routes with tension cables
- UTP CAT 5e for outside with protective sheath in PVC
All cables muste be LSZH for Low Smole Zero Halogen
Technical characteristics:
• Brushed stainless steel exterior AISI 316 with ABS frame and glass
parts are made from ultra-strong, scratch-proof.
• Ready to install semi-surface mounted wall with metal coupling
•The night light is ensured by 4 efficiency LED
• LCD Display 4.3 " and presence sensor in Art. Z100D
• Standby power consumption 7 mA , in conversation : 150mA
• Operating Temperature : -20
°
to 50
°
C
• Dust and Water Resistant - Rating IP54
•
Size : 262x95x19 mm
Maintenance:
Clean the entrance panel using a soft cloth. Do not use any type of
chemical product.
h= 160 cm