Infinite Play TINF4.POE, Руководство пользователя по установке и эксплуатации

Страница: 7 / 32

INFINITE PLAY
7 EN
2. Installation Environment and introduction
2.1 Installation Environment and Cautions
Installation environment:

Normal working temperature is -10℃
～
55℃
，
Storage temperature is -10℃
～
65℃.

Normal working humidity is 15%
～
85%.

The equipment must keep horizontal either in installation or on using.

Avoid installing in high temperature or humidity conditions.

In order to ensure normal heat, installed a cooling fans in the equipment, should install the
models into a well-ventilated environment.

The back of NVR should be placed 6cm away from the other device or wall while installing.

Moving the NVR between two places with high difference in temperature will shorten the using
life.

Please install the lightning conductor when the machine is used in frequent thunder areas.
Cautions:

Don’t touch the power switch or the NVR by wet hands.

Make sure the machine and its case are grounded (There is an earth interface on the back panel
of the machine. )

Keep the power supplier stable to avoid abnormal power cut off.

Avoid dropping liquid or metal into machine that may cause short circuit or fire.

The models don’t include the HDD. Don’t record or playback until at least on HDD is installed.

Short circuit would happen when moist dust is on the board, so user has to termly brush the
board and other accessories to make the machine work in good condition.

Video/audio/RS485 devices cann’t be plug or draw when the power is on , or else the equipment
will be easily damaged.

When turn off the NVR, please don’t shut off the power switch. Should use the power button of
front panel, to make sure NVR cut off the power automatically for avoiding damage HDD.

NVR could detect the connected HDD. If detect new NVR which didn’t format, system will notice
user to start the format for HDD.(System support HDD format function without based on the PC )

Warning: Pls don’t use the NVR HDD to PC if un-professional user. Following illegal operation
will make the data of HDD Unrecognized after connect the HDD to NVR and require
format.(modifying or editing file name;open the contents and edit;copy the data out and copy
back to NVR HDD;Third party browser might be modify the record position of HDD)

Pls don’t open the casing.

To make sure recording data integrality, change the damaged HDD in time.
2.1.1 Notice for HDD installation.
1. Recommend high speed HDD which above 7200 or NVR special HDD.