Infinite Play Small, Инструкция по установке и эксплуатации

Страница: 23 / 24

SMALL
SAFETY INSTRUCTIONS FOR INSTALLERS
This equipment is used in video door entry and home & building
automation systems.
The instructions in this document provide important information about
safety, installation, use and maintenance of the product.
Verify that the equipments are undamaged, after purchase.
The packaging contains potential dangerous sources for children
(screws and dowels).
The installation must respect the current CEI regulations.
It is necessary to install to the power sypply a protection bipolar type
switch to video door entry system.
Before connecting this equipment verify the output voltage supplied
from the distribution network.
Before performing maintenance operations, disconnect the device.
In case of failure or malfunction, disconnect the device and contact the
technical assistance centre.
Do not obstruct opening of ventilation or heat exit slots.
The protection bipolar type switch must be located in the main
framework of the House.
WARNING:
This equipment must be fixed to the wall according to the installation
instructions.
Directive 2012/19/UE (WEEE)
The crossed-out wheelie bin symbol marked on the product indicates
that the product must be assigned to a differentiated collection centre
for electrical and electronic equipment or returned to the dealer to
purchase a new product.
For further details regarding the collection systems available, contact
your local waste disposal service.
The user is responsible for assigning the equipment purchased, to the
appropriate collection facilities.
Risks connected to substances considered as dangerous (WEEE).
According to the WEEE Directive, these electrical and electronic
products contain harmful substances for people and the environment.
It is obligatory treat the recycling of the materials in such way to avoid
negative impacts on the environment and people’s health.
Adaptation to current regulations allows a correct recycling of which the
product is made.
.
23
EN
This leaflet must always be attached to the system documentation.
Product is according to EMC Directive 2004/108/EC, LVD 2006/95/EC
and RoHS 2011/65/EU.
This product is Listed by UL. Representative samples of this product
have been evaluated by UL and meet applicable safety standards.
Product is according to UL60950-1 2nd E A1 + A2.
Product is according to IEC 60950-1 2nd E A1 + A2.
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired operation.
This Class[B] device complies with ICES-003 Issue 5.
CAN ICES-3 (B)/NMB-3(B)