Infinite Peripherals Stimare DPP-255, Руководство пользователя

Страница: 7 / 49

DPP-255 Mobile Printer User Manual Page 6 of 48
UM-00017 Version: A
GUIDELINES FOR USE
Warnings and Cautions
Environmental
Avoid using the printer under the following conditions, as it may result in printer failure and/or serious personal
injury.
• Anywhere printer may be exposed to excessive dust, moisture, or direct sunlight/heat.
• Slanted surfaces, or those surfaces which may be subject to strong shocks or vibrations.
• Environments with temperatures over 60°C or below -20°C, or with a relative humidity of 85% or more.
• Areas subject to electromagnetic noise or corrosive gas.
• If there is condensation on the thermal head. If condensation is present, the power should be kept off
until the condensation evaporates completely.
Mechanical
Use caution when handling the thermal head to prevent heat elements and driver IC from exposure to static
electricity.
Do Not...
• Touch the dot line on the thermal head/driver IC with metal, sandpaper, etc., or your fingers. This may
cause damage and/or contamination and result in reduced print quality.
• Use volatile chemicals such as thinners or benzene for maintenance work.
• Open the paper cover while printing.
• Pull the paper out of the printer forcibly when the printer cover is closed.
• Use loose paper or block the paper exit of the printer. It may cause the paper to jam. Note: If a paper jam
occurs, turn off the power to the printer.
• Attempt to disassemble or repair the printer, AC adapter or power cord yourself. See section titled
SERVICING YOUR DPP-255 MOBILE PRINTER
for additional information
.
Electrical
If the printer is not being used, or any of the following conditions exist, turn the printer power OFF and
disconnect the AC adapter from the outlet..
• Smoke, unusual noises or odd smells are emittied by the printer.
• When metallic objects are dropped, or any liquid is spilled, inside of the printer.
Do Not...
• Connect or disconnect the AC adapter with wet hands. This may result in electric shock, short circuit
and failure.
• Use any AC adapter or power cord other than those provided with the printer and/or specficified by an
IPC account representative or certified service center.
• Bend the AC power cord or place heavy objects on top of it. Doing so may cause damage to the cord
and/or cause fire or electric shock.
• Use a damaged AC power cord due to risk of fire or electric shock.
• Drop any metallic objects or spill coffee, water or any other liquid onto the printer.