Replacing Battery
To replace the battery in the Lin
ē
a barcode scanner follow the steps
below.
Steps:
1. Turn over the Lin
ē
a as shown in the figure below.
Figure 10
2. Push and slide the battery cover as showed in the figure below.
Figure 11
3. Lift the battery and unplug the battery connector as shown in the figure
below. Take care when removing the connector as to not damage the
wires. Reverse Steps 1-3 to install the new battery pack.
Figure 12
. . . . . . . . . . . . . . . . . . . .
Infinite Peripherals, Inc.
www.ipcprint.com
Page 21
Lin
ē
a User Manual v1.04
