Infinea® mPOS User Manual
Page 37 of 50
UM-00010 Version: B
Contactless Card Reader
(Optional)
The Infinea mPOS has a built-in tag/card reader for NFC payments.
To Use the Contactless Card Reader:
1. Place the RFID tag/card over the receiver/transmitter as indicated by the NFC label on the front
of the mPOS unit.
2. Press the reading RFID card button on the application. The data will be sent from Infinea mPOS
reader to the iOS Device.
Note:
See NFC LED Indicator table below for an explanation of the
status indicators.
Note:
Do not remove the card from the receiver/transmitter until the transaction is completed.
Removing the card too quickly may void the transaction.
Figure 8: Contactless Card (RFID) Reader
