InfiniSource ETC 100, Руководство по оборудованию

Страница: 104 / 234

92 Infinisource
Clock Passcode
This is the clock password that the ClockLink uses to communicate with
the IQ 1000. You must supply ClockLink with the correct password
before you will be able to communicate with your time clock.
57
Enforce
Password
When enabled, the password sent by the ClockLink or
Clock Server utilities at login will be evaluated. The login
will be denied if the password does not match the pass-
word stored in the clock. With this option disabled, any
password sent by ClockLink or Clock Server will be
accepted.
Note: ClockLink and Clock Server must still attempt the
password to gain login access.
58 Job Required
When enabled, the clock requires the user to enter a job
number using the <JOB> key on the clock keypad before
a punch will be accepted.
59 Qty Required
When enabled, the clock requires the user to enter a
quantity amount using the <QTY> key on the clock key-
pad before a punch will be accepted.
60 Task Required
When enabled, the clock requires the user to enter a task
number using the <TASK> key on the clock keypad before
a punch will be accepted.
61 Dept Required
When enabled, the clock requires the user to enter a
department number using the <DEPT> key on the clock
keypad before a punch will be accepted.
62 Break Punch
With this option enabled and configured on a per-
employee basis in TimeForce, the clock will track when
the employee clocks out for a break, and will require the
employee to take the specified amount of time before
being allowed to clock back in.
TABLE: Hardware-2: IQ 1000 Clock Options
Number Name Description