
2.2.1
Jumper settings for all variants
Header X7 (Input capacitor C1)
A capacitor C1 of 47 µF can be connected to VIN by placing a jumper on X7.
Header X8 (Enable function)
EN input pin can be configured by X8.
Table 3
Header X8 options for Enable function
X8
Function
EN
↔
VIN
The regulator is enabled while EN pin is connected to VIN
EN
↔
GND
The regulator is disabled while EN pin is connected to GND
open
The EN input pin is supplied from the EN banana jack connector
4
Without supplying a signal to EN, the regulator is disabled because of the internal pull-down resistor
TLS8xxx2ELVxx Demoboard
Z8F61720705
Demoboard
Application Note
5
Rev. 1.0
2018-05-15