Infineon TLI4970, Руководство пользователя

Страница: 17 / 26

Graphical User Interface
User’s Manual 17 Rev. 1.2, 2013-06-06
Software Description for Evaluation Kits
will change to the name of the programmer selected in the list. Further, the name of the programmer that has been
selected before will be extended with a so-called connect symbol as illustrated in
Figure 12 .
Afterwards, the main window will be extended with a field “Sensor”. This field must be used to determine the type
of sensor that has been connected to the Evaluation Board. Please select the correct type of sensor, for example
TLI4970.
Figure 12 Selection of sensor
Once a sensor has been selected the main window changes again. This time the menu bar is activated and sensor
specific information is displayed, see
Figure 13 .
After a correct type of sensor has been selected, the menu bar is enabled and can be selected. The menu bar
offers functions to display and change the content of the EEPROM, see
Chapter 4.3 . Further, the menu bar
provides information about the version of the Evalkit software, see Chapter 4.4.1 .
To monitor the current values of the sensor the “Start” button must be pressed. Depending on the configuration
inside the sensor specific area, current values will be read from the sensor, periodically. The read values will be
interpreted, analyzed, and displayed by the software, see
Chapter 4.2 . For example, each value, which has been
read from the sensor, will be stored temporarily in a CSV file located in the folder “C:\ProgramData\Infineon
Technologies\TLI4970”
1)
.
Before the sensor or the Evaluation Board will be unplugged, turn off the supply power of the sensor. To turn off
the power please press the button “Power is On”. After pressing this button the power is turned off and the name
1)
The folder “C:\ProgramData\” is provided by the operating system for application specific data and is hidden,
typically. To show this folder, please open the “Folder and Search options” dialog that is available in the
Windows Explorer in the section “Organize (see
Figure 14
). Change the selection from “Don’t show hidden
files, folders, or drives” to “Show hidden files, folders, and drives”. Press OK to take over the new setting.
Afterwards, the respective folder “C:\ProgramData\” is shown by the Windows Explorer.
Serial Number of
Connected PGSISI-2 Box
Connect Symbol
Selection of Sensor