Infineon REF-XDPL8219-U40W, Начало работы, Страница: 2 / 10

User Manual 2 V 1.0
2020-08-12
Getting started with the XDPL8219 reference board using .dp Vision
software
Tools
1 Tools
1.1 Required hardware and software tools
The required hardware and software tools are listed in Table 1 . Please order all the hardware tools and
download and install all the software tools.
Table 1 Required hardware and software tools for getting started
Name Order link Description Order content
Please order all the hardware tools. Click on the links below:
XDPL8219 reference board
Click on the link:
40 W reference board
XDPL8219 reference
board for LED lighting
XDPL8219 reference
board
Driver for LED lighting
Programming cable
To connect the
XDPL8219 reference
board with the .dp
Interface Gen2
.dp Interface Gen2
Click on the link:
IF-BOARD.DP-GEN2
Interface board to
control XDPL8219 from
PC/notebook
.dp Interface Gen2
Interface for
programming the
XDPL8219 digital
controller
USB cable
To connect the .dp
Interface Gen2 with a
PC
Please download and install all the software tools. Click on the links below:
Graphical user interface (GUI)
for read and write access to the
parameters in the OTP
Click on the link and
follow the instruction in
the right-hand column:
.dp Vision
Accept the mentioned
terms and conditions
Click “Run”
Install .dp Vision
.dp Vision installer
(*.msi)
dpVision_folder_set-up copies
auxiliary files including the
parameter .csv file to the
respective directory structure
Click on the link and
follow the instruction in
the next column:
REF-XDPL8219-U40W
On the website of the
respective product,
choose the section
“Tools & Software”
Click on “Development
Tools”
Choose and open the .zip
file
“REF-XDPL8219-U40W_
dpvision_folder_set-
up.zip”
Double-click the
unpacked .msi file to
install
XDP™ digital power –
.dp Vision setup with
the following
documents:
XDPL8219 parameters
.csv file
XDPL8219 images file
XDPL8219
documentation files
.dp Interface Gen2
firmware