User Guide
23 of 46
Rev. 1.0
2022-03-09
48V Battery Switch Reference Design
R 48V BATT Switch10
System and functional description
Column 1 is the register number, column 2 the register name, column 3 shows the hex value of the register
content. Columns 4 to 11 show the register bit names.
The register names and the bit names are shortened versus the naming in the specification for space reasons
and to make it easier to read.
If a bit is set to “1” (high), its name is printed in
inverse
font.
Reporting of changed bits
The register content is constantly monitored for changes. If a bit is set or cleared it will be reported.
Failure reporting
In case of an interrupt or if the failure bit is set, the diagnosis bits are checked and the failures are reported.
Figure 26
Example for reporting of failures and changed bits
2.4
Configuration
Displaying the configuration
The configuration settings can be displayed using the command “c”. For each setting the corresponding
command and the resulting typical data sheet value for the chosen setting is mentioned in brackets.
Figure 27
Display of configuration settings
