Infineon MERUS Hat ZW with Volumio, Быстрый старт

Страница: 6 / 12

6
– Initial configuration menu
4
– Insert SD card in the Pi
5
– Connect to volumio.local/
Software setup
›
After the burning process insert the SD
card in the Raspberry Pi and turn it on.
›
connect your host machine or mobile phone
to
“Volumio” network and then type
http://volumio.local/ into your web browser
to
access the configuration screen.
Password is
“volumio2”.
›
Go through the initial configuration menu
and follow the instructions in the Volumio
GUI to finish your configuration. This menu
will appear automatically the first time you
boot the Raspberry Pi.
Figure 7. Assembly procedure of the Raspberry Pi + HAT
Figure 8. Assembly procedure of the
Raspberry Pi + HAT
Figure 9. Volumio initial configuration
6
December 2019 Copyright © Infineon Technologies AG 2019. All rights reserved.