User Manual
4
Revision 1.2
2018-09-23
EVAL-M1-36-84A User Manual
iMOTION
™
Modular Application Design Kit
Introduction
2
Introduction
The EVAL-M1-36-84A evaluation board is a part of the iMOTION
™
Modular Application Design Kit for drives
(iMOTION
™
MADK).
The MADK-platform is intended to use various power stages with different control boards. These boards can be
easily interfaced through the 20 pin iMOTION
™
MADK-M1 interface connector.
This evaluation board was designed to give comprehensible solutions of a power stage featuring CIPOS
™
. The
board is equipped with all assembly groups for sensor less field oriented control (FOC). DC-link is provided by
direct DC-input to give direct control to DC-ripple by external source. It contains in every of three output phases
emitter-shunts for current sensing and a voltage divider for DC-link voltage measurement.
The EVAL-M1-36-84A evaluation board is available from Infineon. The features of this board are described in the
design feature chapter of this document, whereas the remaining paragraphs provide information to enable the
customers to copy, modify and qualify the design for production, according to their own specific requirements.
Environmental conditions were considered in the design of the EVAL-M1-36-84A. The design was tested as
described in this document but not qualified regarding safety requirements or manufacturing and operation
over the whole operating temperature range or lifetime. The boards provided by Infineon are subject to
functional testing only.
Evaluation boards are not subject to the same procedures as regular products regarding Returned Material
Analysis (RMA), Process Change Notification (PCN) and Product Discontinuation (PD). Evaluation boards are
intended to be used under laboratory conditions by specialists only.
Figure 1
Evaluation-board EVAL-M1-36-84A