Infineon iMOTION EVAL-M1-36-44A Скачать руководство пользователя страница 13 | Manualshive

Страница: 13 / 29

Infineon iMOTION EVAL-M1-36-44A Скачать руководство пользователя страница 13

User Manual

13

Revision 1.0

2019-07-25

EVAL-M1-36-44A User Manual

iMOTION™ Modular Application Design Kit

Getting Started with EVAL-M1-36-44A

6.

Connect AC power to power input connector (J1) and power on system.

7.

Open MCEDesigner and open MCEDesigner default configuration file (.irc) for IMC101T devices

(IMC101T_xx.irc) by clicking “File” menu and select “Open” in the pull down list.

8.

Import system drive parameters file (generated in step 5) into MCEDesigner by clicking “File” > “Import
Drive Parameters”. Select “Update All” radio button.

9.

Program the MCE Firmware and system parameters into the internal Flash memory of iMOTION™ IC by

clicking “Tools > Programmer “in the pull down menu, and then clicking on the “Program Firmware and

Parameter” radio button. See chapter MCEDesigner setup overview setion 5.2.2 for more details. If the
latest version of MCE firmware is already programmed into the IMC101T-T038 IC, then programming

firmware can be skipped by selecting “Program Parameters” radio button option. Finally click “Start”

button to program firware and parameter (or parameters only when programming firmware was skipped).

10.

Start the motor by clicking the green traffic light button in the control bar.

«
...
11
12
13
14
15
...
»

Содержание iMOTION EVAL-M1-36-44A






























Отзывы:

Нет отзывов