User guide
11 of 32
V. 1.0
2020-11-03
EVAL-M1-101TF user guide
iMOTION™ Modular Application Design Kit
System and functional description
Table 3
MCEWizard setup overview table
Parameter
Value
Comment
Power board selecting
MADK power board name
If no, select similar
power board to modify
Motor 1 shunt configuration
Refer to the power board App Note
Controller supply voltage
Refer to the power board App Note VDD is 3.3 V by default
Max DC bus voltage
Refer to the power board App Note
DC bus sensing high resistor
Refer to the power board App Note
DC bus sensing low resistor
13.3 kOhm
NTC temperature shutdown
value
Calculated as in Section 2.5.2
Refer to the power
board App Note
GateSense low-side devices
Refer to the power board App Note High is true by default
GateSense high-side devices
Refer to the power board App Note High is true by default
Motor 1 Current input
Calculated as the Section 2.4.2
To start the MCEWizard system setup procedure, click the “Next” button in the right bottom corner as shown in
Figure 6.
Figure 6
Opening the default configuration file of this board
After all the MCEWizard questions are answered, the “Verify & Save Page” will be shown as in Figure 7.