ESD TVS Diodes
Agilent ADS Design Kit Manual
3
Using Design Kit
After installation steps design kit is ready to use. The "Infineon TVS" components palette (Fig.
) appear at the first
position of the palette list. It contain listed in Sect.
components. They can be placed like any other ADS component
in the schematic. If any Infineon component was used, it is necessary to place also "Infineon Netlist Include" (Fig.
component otherwise simulator will report error. Components do not have any parameters, and component name
correspond to part and package description.
Figure 4: Infineon ADS palette
Figure 5: Infineon Netlist Include component
There are two ways to place Infineon components in the schematic: using palette(Fig.
) and using components
library(Fig.
). The component library can be called through Insert->Component->Component Library menu. Both
ways are supported by Infineon’s design kit and both provide a brief device information for the designer.
Infineon Technologies AG
Page 6 of 8
Rev. 1.0.4 - October 7, 2011
