
MB2146-401 F
2
MC-8FX Family Evaluation Board Operation Guide, Doc. # 002-07324 Rev. *A
14
Board Setup/Function
4.3
LED port selection
It is decided whether a light emitting diode connection change jumper plug (JP1/JP2) connects the
light emitting diode port on this board to each port of the evaluation MCU carried on the MCU board,
or it does not carry out.
When using a Light Emitting Diode port,an attached jumper plug is connected to this board. A jumper
plug is not connected when not using a light emitting diode port.
About the switch of the state of the terminal of the evaluation MCU port corresponding to each light
emitting diode, lighting is deleted on L level. Moreover, lighting has H level given.
Correspondence of a Light Emitting Diode port is shown in Table 4-2.
Table 4-2. Correspondence of LED port
Position
Evaluation MCU port
Light Emitting Diode port
JP1/JP2
Terminal
JP1
1 - 2
P00C
LED1
JP1
3 - 4
P01C
LED2
JP1
5 - 6
P02C
LED3
JP1
7 - 8
P03C
LED4
JP1
9 - 10
P04C
LED5
JP1
11 - 12
P05C
LED6
JP1
13 - 14
P06C
LED7
JP1
15 - 16
P07C
LED8
JP2
1 - 2
P60
LED9
JP2
3 - 4
P61
LED10
JP2
5 - 6
P62
LED11
JP2
7 - 8
P63
LED12
JP2
9 - 10
P64
LED13
JP2
11 - 12
P65
LED14
JP2
13 - 14
P66
LED15
JP2
15 - 16
P67
LED16