
AURIX
™ lite Kit V2
Hardware Description
Board Users Manual
6
Revision October, 2020
1
Introduction
This document describes the features and hardware details of the
AURIX
™ lite Kit V2
equipped with a
32-Bit Single-Chip AURIX
™ TriCore™-based Microcontroller TC375, TC365, TC275 or TC265
from Infineon
Technologies AG.
It can be used with a range of development tools including
Infineon’s free of charge Eclipse based IDE
AURIX
™
Development Studio
or
the Eclipse based
“FreeEntryToolchain”
from Hitecs/PLS/Infineon
.
is a comprehensive environment, including C-Compiler and Multi-core Debugger, Infineon
’s
low-level driver (iLLD), with no time and code-size limitations that enables editing, compiling and debugging
application code. The FreeEntryToolchain is a full C/C++ development environment which has a source-level
UDE debugger from PLS included and is also based on Infineon low-level driver (iLLD).
shows the overview specifications of the whole board.
Table 1
Overview of the Board Specification
CPU Core AURIX
™
Manufacturer Order No.
SAK-TC375TP-96F300W AA
Manufacturer Order No.
SAK-TC365DP-64F300W AA
Manufacturer Order No.
SAK-TC275TP-64F200W DC
Manufacturer Order No.
SAK-TC265D-40F200W BC
Board Dimensions
66.0 x 131.0 mm
Power
on-board miniWiggler Micro-AB USB interface
external powering 5
V…40 V (recommended 7 V...14 V)
Connectors
Most AURIX
™ pins available on expansion connectors (X1, X2)
Two Infineon Shield2Go connectors
Arduino compatible connectors for 3.3 V
mikroBUS™ connector
Micro-USB connector
DAP Debug connector
CAN connector
RJ45 connector
Others
CAN transceiver TLE9251VSJ from Infineon
Low Power 10/100 Mbps Ethernet Physical Layer Transceiver DP83825I from TI
1 user push-button, 3 user LEDs
Reset push-button
Potentiometer (10 kOhm) for variable analog input
These boards are neither cost nor size optimized and do not serve as a reference design.