Evaluation Board Notes
Information
•
Supply voltage is typ. 3.3 V, please refer to the
for more details about
maximum ratings
•
Pin out on top (head) is directly connected to the
pins of the TLV493D-A1B6 sensor
•
The break out board is compatible with Infineon’s
offer of joysticks, rotation knobs and additional
supplies for the 3D magnetic sensor portfolio
•
If head is broken off, only one capacitor is
connected to the TLV493D-A1B6 sensor
•
Software compatible with Arduino and library fully
integrated into the Arduino IDE
•
Sensor has different I2C addresses, please refer to
for more information
•
Sales Name S2GO_3D-SENSE_TLV493D and OPN
S2GO3DSENSETLV493DTOBO1
Head
Breakable
Ensure that no voltage applied to any of the pins
exceeds the absolute maximum rating of 3.5 V
Link to
3
2018-07-17
Copyright © Infineon Technologies AG 2018. All rights reserved.
