1-1
Rev. 1.0
2016-10-24
User Manual
TLE984x Evalboard Rev 1.3
Concept
1
Concept
Figure 1 Evalboard
Concept
This board is designed to provide a fast and easy start of evaluation, for Infineons embedded Power TLE984x
device family. Initialy, the evaluation board brings several interfaces and interconnections shown in Figure 1.
The TLE984x device is placed in the center of the PCB. A socket provides the possibility to test and evaluate all ICs
out of the TLE984x device family. Every pin of the IC is connectable via rows of pinheader. The board is protected
against reverse polarity of input voltage supply. A bidirectional relay can be connected to the integrated lowside
switches, optionaly. In addition to that, a scew-connector is placed near the relay to contact and drive a DC
motor(example: window lift motor).
The evaluationboard provides an on board debugger. It is placed in the upper left of Figure 1. It provides a SWD-
Debug connection and a virtual COM port for serial UART communication.
Highside and Lowside switches and VDDEXT are connectable via 4mm standard laboratory wires.
The High-Voltage-Monitor pins can be triggered with dedicated pushbuttons.
For analog input values a potentiometer is connected to PIN P2.2.
The LIN connection is able to be configured to master and slave mode.
