CYTVII-B-H-1M-176-CPU Evaluation Board User Guide, Document Number: 002-25907 Rev. *A
4
1.
Introduction
This user guide provides instructions to handle the CYTVII-B-H-8M-176-CPU and CYTVII-B-H-176-SO evaluation boards,
collectively referred to as 'CPU board' in this document. This is an evaluation platform for the CYT4BF8C Traveo™ II device.
The board can be used as a standalone for basic validation or in combination with the CYTVII-B-E-BB Traveo II base board
(available separately from Cypress). This document assumes that you will work with the combination (CPU board + base
board), and provides guidance on how to use the features of the evaluation platform.
1.1
Precautions and Warnings
The board is a delicate PCB; make sure that the evaluation board is handled by qualified personnel who are aware of the
capabilities of the board. Handle the board carefully and make sure it is not bent or subjected to stress. Ensure your own
safety arising from electrical hazards and other sources.
The CPU board is shipped with a 12 V DC power adapter. This adapter can be plugged into the AC mains supply anywhere in
the world and is designed to receive 100-240 V AC V @ 50/60 Hz. While powering the board, you must connect only the
power adapter supplied with the evaluation board and not any other part.
