Inficon HLD6000, Руководство по установке

Страница: 51 / 76

6 Operation
51
Tr
an
sl
ation
o
f the
o
rig
in
al
operatin
g
in
str
u
ct
io
ns
HLD
6000
, k
ina4
3
e1-
a
, 140
8
– Interval for calibration request, see "6.3.6 Set time interval for calibration request",
page 36 ,
– Calibration factor, see "6.4.6 Calibration", page 43 (can be changed by the service
team),
– Config. Analog outputs 1 - 2, see "6.3.8.2 Configuring analog outputs", page 37 ,
– Configuration PLC Outputs 1 - 8, see "6.3.8.5 Configuring PLC outputs", page 37 ,
– Configuration PLC Inputs 1 - 10, see "6.3.8.6 Configuring PLC inputs", page 38 ,
– Volume, see "6.3.3 Adjust volume", page 34 ,
– LR setpoint 1, see "6.4.1 Setting setpoints", page 41 ,
– LR setpoint 2, see "6.4.1 Setting setpoints", page 41 ,
– Display measured value, see "6.3.5 Setting the display", page 35 ,
– Module on the M12 socket, see "6.3.8 I/O module", page 36 ,
– Phase, see "6.4.6 Calibration", page 43 (can be changed by the service team),
– Calibration leak external, see "6.4.6.3 Calibration with an external calibration leak",
page 45 ,
– Interface unit leakage rate, see "6.3.8.7 Setting the interface unit", page 38 ,
– Sniffer light alarm config., see "6.4.2 Setting up the sniffer probe", page 41 ,
– Sniffer light brightness, see "6.4.2 Setting up the sniffer probe", page 41 ,
– Sniffer key configuration, see "6.4.2 Setting up the sniffer probe", page 41 ,
– Setpoint audio alarm, see "6.4.3 Setting up an alarm profile for setpoints", page 41 ,
– Record interval, see "6.4.8 Measured data", page 47 ,
– Memory location, see "6.4.8 Measured data", page 47 ,
– Language, see "6.3.1 Setting the language", page 34 ,
– Time, see "6.3.2 Setting date and time", page 34 ,
– Value axis decades, see "6.3.5 Setting the display", page 35 ,
– Value axis grid, see "6.3.5 Setting the display", page 35 ,
– Time axis scale, see "6.3.5 Setting the display", page 35 ,
2 To change individual parameters, press on an entry on the touch screen.
3 Either confirm changes with or reject them with the key.
6.8 Updating the software
Software updates from INFICON are installed with the aid of a USB stick. The update func-
tion of the device can be found under "
> Update".
An update is possible,

if one or several updates are available on the USB stick, but only one update per type
at most (basic unit, operating unit, sniffer line, I/O module),

if in the case of the "sniffer line" or the "I/O module" these parts are also connected free
of disturbances and have an update function.
The corresponding keys in the update menu such as "Basic Unit", "Operating Unit", "Sniffer
Line" and "I/O Module" are active and can be activated individually. Inactive buttons can
be recognized as they are in gray.