![background image](http://html1.mh-extra.com/html/infasecure/cs5610/cs5610_manual_2054871011.webp)
the backrest adjust the headrest described in setup
to best suit your child (refer page 9)
USING LAP-SASH SEAT BELT
BOOSTER
WITH LAP-SASH SEA
T BEL
T
BARREL
SECTION (1)
TOGGLE
SECTION (2)
LAP
SECTION
BUCKLE (A)
SAFE GRIP (B)
(red belt clamp)
SASH SECTION
(AND TONGUE)
SAFE GRIP
BELT CLAMP
It is important that the lap belt must be
firmly across
the thighs
. The
Safe Grip locks the lap belt
to
ensure a firm fit across the thighs, and avoids slack in
the lap belt. This fit ensures that the lap belt
does not
ride up
into the soft abdominal region of the child,
which may cause internal injury.
Refer to shoulder height marker (As shown on pages 5 and 6)
IMPORTANT
!
To install the
Safe Grip
(red belt clamp), open it and clamp the “sash section” of the vehicle seat
belt by closing the barrel section of the red belt clamp in the direction of arrow 1 in figure 2 and
then locking with the toggle section by pushing in the direction of arrow 2 in figure 2 when the
Safe
Grip
(red belt clamp) is secured in place, the lap section is now tightly holding your child in place,
independent of the sash section. The
Safe Grip
(red belt clamp) can be left located on the sash
belt when the child is removed from the booster. It is then ready for the next use. Repositioning of
the
Safe Grip
(red belt clamp) may be required as the child grows. Always keep the
Safe Grip
(red
belt clamp) in pocket provided when not in use.
“INSTALLING IN VEHICLE” (refer page 9)
The red “Booster Seat belt Path” labels are located
each side of the Booster seat and at the head of the
Booster seat (as shown on page 8).
Position the lap section of the vehicle seat across the
child’s lap then insert the buckle tongue in the belt
buckle (A). Ensuring the lap portion is positioned
under the armrests and over the child’s thighs.
Pull the lap belt tight by first pulling on the lap belt in
the direction of arrow 1 (refer figure 1). Pull the sash
belt tight in the direction of arrow 2. While holding the
belts tight, place the Safe Grip (red belt clamp) (B) on
the sash section as close as possible to the buckle
tongue (A). (Refer to Figure 2 and instruction for
installing the
Safe Grip
red belt clamp below).
A
B
DO NOT LEAVE CHILDREN UNATTENDED IN THE CAR
WARNING
!
10