Refer to shoulder height marker
(As shown on pages 5 and 6)
IMPORTANT
!
BOOSTER
WITH LAP-SASH SEA
T BEL
T
The headrest can be adjusted to different heights,
to best suit your child’s shoulder height. This can
be done with the child in the seat.
Grab the headrest, push or pull to move the headrest
either up or down.
Adjust the headrest height so that the bottom of the
sash guide is located level with or just above the
child’s shoulder.
Pull to tighten and remove all the
slack, from the upper anchorage
strap. Do not overtighten as this
could cause the restraint to lift off
the vehicle seat (Refer to Figure 2).
WARNING
!
DO NOT USE WITH JUST A LAP BELT.
You must use a lap-sash seat belt.
ADJUSTER
ATTACH
PULL TO
TIGHTEN
Tilt
Pull to
lengthen
Pull to
tighten
9
